Optical Systems Design OSD2790SFP User Manual page 69

Destination Address
Indicates the SNMP trap destination address. It allow a valid IP address in dotted decimal notation
('x.y.z.w').
And it also allow a valid hostname. A valid hostname is a string drawn from the alphabet (A-Za-
z), digits (0-9), dot (.), dash (-). Spaces are not allowed, the first character must be an alpha
character, and the first and last characters must not be a dot or a dash.
Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-bit records represented
as eight fields of up to four hexadecimal digits with a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand way
of representing multiple 16-bit groups of contiguous zeros; but it can appear only once. It can also
represent a legally valid IPv4 address. For example, '::192.1.2.34'.
Destination port
Indicates the SNMP trap destination port. SNMP Agent will send SNMP message via this port,
the port range is 1~65535.
Buttons
: Click to add a new access management entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
PAGE 69
OPTICAL SYSTEMS DESIGN
OSD2790SFP OPERATOR MANUAL
DOC ID: 10118801