Table of Contents
Advertisement
Default
To set the switch port to use the default VLAN Translation Group click the checkbox and press
Save.
Group ID
The VLAN Translation mappings are organized into Groups, identified by the Group ID. This
way a port is configured to use a number of VLAN Translation mappings easily by simply
configuring it to use a given group. Then number of possible groups in a switch is equal to the
number of ports present in this switch. A port can be configured to use any of the groups, but only
one at any given time. Multiple ports can be configured to use the same group. A valid Group ID
is an integer value from 1 to 14.
Note: By default, each port is set to use the group with Group ID equal to the port number. For
example, port #1 is by default set to use group with GID = 1.
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
: Click to save changes.
: Refreshes the displayed table starting from the input fields.
PAGE 172
OPTICAL SYSTEMS DESIGN
OSD2790SFP OPERATOR MANUAL
DOC ID: 10118801
Advertisement
Table of Contents
