Optical Systems Design OSD2790SFP User Manual page 173

VLAN TRANSLATION MAPPING TABLE
Configuration VLAN Translation
This page allows you to create mappings of VLANs -> Translated VLANs and organize
these mappings into global Groups.
Group ID
The VLAN Translation mappings are organized into Groups, identified by the Group ID. This
way a port is configured to use a number of VLAN Translation mappings easily by simply
configuring it to use a given group. Then number of possible groups in a switch is equal to the
number of ports present in this switch. A port can be configured to use any of the groups, but only
one at any given time. Multiple ports can be configured to use the same group. A valid Group ID
is an integer value from 1 to 14.
Note: By default, each port is set to use the group with Group ID equal to the port number. For
example, port #1 is by default set to use group with GID = 1.
VID
Indicates the VLAN of the mapping (i.e. 'source' VLAN). A valid VLAN ID ranges from 1 to
4095.
TVID
Indicates the VLAN ID to which VLAN ID of an ingress frame will be translated to (granted that
the mapping is enabled on the ingress port that the frame arrived at). A valid VLAN ID ranges
from 1 to 4095.
Modification Buttons
You can modify each VLAN Translation mapping in the table using the following buttons:
: Edits the mapping row.
: Deletes the mapping.
: Adds a new mapping.
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
: Refreshes the displayed table starting from the input fields.
: Click to remove all VLAN Translation mappings.
PAGE 173
OPTICAL SYSTEMS DESIGN
OSD2790SFP OPERATOR MANUAL
VLAN Translation Mappings
DOC ID: 10118801