Table of Contents
Advertisement
Certificate Upload
Upload a certificate PEM file into the switch. The file should contain the certificate and private
key together. If you have two separated files for saving certificate and private key. Use the Linux
cat command to combine them into a single PEM file. For example, cat my.cert my.key > my.pem
Notice that the RSA certificate is recommended since most of the new version of browsers has
removed support for DSA in certificate, e.g. Firefox v37 and Chrome v39.
Possible methods are:
Web Browser: Upload a certificate via Web browser.
URL: Upload a certificate via URL, the supported protocols are HTTP, HTTPS, TFTP and FTP.
The URL format is <protocol>://[<username>[:<password>]@]<
host>[:<port>][/<path>]/<file_name>. For example,
tftp://10.10.10.10/new_image_path/new_image.dat,
http://username:password@10.10.10.10:80/new_image_path/new_image.dat. A valid file name is
a text string drawn from alphabet (A-Za-z), digits (0-9), dot (.), hyphen (-), under score(_). The
maximum length is 63 and hyphen must not be first character. The file name content that only
contains '.' is not allowed.
Certificate Status
Display the current status of certificate on the switch.
Possible statuses are:
Switch secure HTTP certificate is presented.
Switch secure HTTP certificate is not presented.
Switch secure HTTP certificate is generating ....
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Click to refresh the page. Any changes made locally will be undone.
:
PAGE 63
OPTICAL SYSTEMS DESIGN
OSD2790SFP OPERATOR MANUAL
DOC ID: 10118801
Advertisement
Table of Contents
