This page allows you to configure the basic QoS DSCP based QoS Ingress Classification
settings for all switches.
The displayed settings are:
DSCP
Maximum number of supported DSCP values are 64.
Trust
Controls whether a specific DSCP value is trusted. Only frames with trusted DSCP values are
mapped to a specific QoS class and Drop Precedence Level. Frames with untrusted DSCP values
are treated as a non-IP frame.
QoS Class
QoS class value can be any of (0-7)
DPL
Drop Precedence Level (0-1)
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
PAGE 202
OPTICAL SYSTEMS DESIGN
OSD2790SFP OPERATOR MANUAL
DOC ID: 10118801