Table of Contents
Advertisement
Dynamic ARP Inspection Table
Configuration
Security
Entries in the Dynamic ARP Inspection Table are shown on this page. The Dynamic
ARP Inspection Table contains up to 256 entries, and is sorted first by port, then by
VLAN ID, then by MAC address, and then by IP address. All dynamic entries are
learning from DHCP Snooping.
NAVIGATING THE ARP INSPECTION TABLE
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the Dynamic ARP Inspection Table.
The "Start from port address", "VLAN", "MAC address" and "IP address" input fields allow the user to
select the starting point in the Dynamic ARP Inspection Table. Clicking the
the displayed table starting from that or the closest next Dynamic ARP Inspection Table match. In addition,
the two input fields will - upon a
allowing for continuous refresh with the same start address.
The
will use the last entry of the currently displayed table as a basis for the next lookup. When the
end is reached the text "No more entries" is shown in the displayed table. Use the
over.
ARP INSPECTION TABLE COLUMNS
Port
Switch Port Number for which the entries are displayed.
VLAN ID
VLAN-ID in which the ARP traffic is permitted.
MAC Address
User MAC address of the entry.
PAGE 107
OPTICAL SYSTEMS DESIGN
Network
button click - assume the value of the first displayed entry,
OSD2790SFP OPERATOR MANUAL
ARP Inspection
Dynamic Table
button will update
button to start
DOC ID: 10118801
Advertisement
Table of Contents
