Table of Contents
Advertisement
Protocol
Transport protocol used by the PTP protocol engine
Ethernet PTP over Ethernet multicast
EthernetMixed PTP using a combination of Ethernet multicast and unicast
IPv4Multi PTP over IPv4 multicast
IPv4Mixed PTP using a combination of IPv4 multicast and unicast
IPv4Uni PTP over IPv4 unicast
Note : IPv4 unicast protocol only works in Master only and Slave only clocks
See parameter Device Type
In a unicast Slave only clock you also need configure which master clocks to request Announce
and Sync messages from. See: Unicast Slave Configuration
VID
VLAN Identifier used for tagging the PTP frames.
Note: Packets are tagged if the port is configured for vlan tagging for the configured VID.
PCP
Priority Code Point value used for PTP frames.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
PAGE 216
OPTICAL SYSTEMS DESIGN
: Click to create a new clock instance.
OSD2790SFP OPERATOR MANUAL
DOC ID: 10118801
Advertisement
Table of Contents
