Table of Contents
Advertisement
This page provides ARP Inspection related configuration.
Mode of ARP Inspection Configuration
Enable the Global ARP Inspection or disable the Global ARP Inspection.
Port Mode Configuration
Specify ARP Inspection is enabled on which ports. Only when both Global Mode and Port Mode
on a given port are enabled, ARP Inspection is enabled on this given port. Possible modes are:
Enabled: Enable ARP Inspection operation.
Disabled: Disable ARP Inspection operation.
If you want to inspect the VLAN configuration, you have to enable the setting of "Check VLAN".
The default setting of "Check VLAN" is disabled. When the setting of "Check VLAN" is disabled,
the log type of ARP Inspection will refer to the port setting. And the setting of "Check VLAN" is
enabled, the log type of ARP Inspection will refer to the VLAN setting. Possible setting of "Check
VLAN" are:
Enabled: Enable check VLAN operation.
Disabled: Disable check VLAN operation.
Only the Global Mode and Port Mode on a given port are enabled, and the setting of "Check
VLAN" is disabled, the log type of ARP Inspection will refer to the port setting. There are four
log types and possible types are:
None: Log nothing.
Deny: Log denied entries.
Permit: Log permitted entries.
ALL: Log all entries.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
PAGE 103
OPTICAL SYSTEMS DESIGN
: Click to translate all dynamic entries to static entries.
OSD2790SFP OPERATOR MANUAL
DOC ID: 10118801
Advertisement
Table of Contents
