Simple Counting - Jadever JWL-1.5K Manual

function.
3. To save the Lower limit and return to weighing mode, Press key
Upper limit setting
1. Begin by pressing down key
the right-most digit blinking.
2. To set the value of upper limit, press key
rightwards, key
decrease setting value.
3. To save the upper limit and return to weighing mode, press key
Place the sample on the weighing pan, if the sample weight is under the lower weight range
while over or equal 20d, the LOW lamp will light up. If the sample is within the lower and upper
weight range while over or equal 20d, the OK lamp will light up. If the sample is over the upper
weight range while over or equal 20d, the HI lamp will light up.

7-4 Simple Counting

UNIT
1. Press key
G/N,
2. Press key
+/PRINT/HI
3. Use key
are10、20、50、100、200、500、1000( pieces)
4. Put the corresponding samples on the weighing pan, and then press key
" "
is displayed momentarily before the display reverts to the sample quantity.
→
+/PRINT/HI.
+/PRINT/HI
to increase setting values and key
to select the unit "PCS".
the ex-factory default sample quantity (10 pcs) is displayed.
HOLD/LO/-
or
(II)
The scale is now in digital inputting mode with
/MR
to shift leftwards, key
to choose the sampling amount. Available options
.
JWL
M+/SAVE
TARE/
to shift
HOLD/LO/-
M+/SAVE
TARE/
.
to
11