Basic Counting; Entering A Known Unit Weight And Unit Weight Memory - Jadever JCN User Manual

OK indication appears, when the item on the weighing pan is between upper and lower limits.
LO indication appears, when the item on the weighing pan is smaller than lower limit
Note: the item on the weighing pan should be more than or equal to 20e.
When changing the Hi-Lo value, the scale will activate the weighing checking function
automatically. If the Lo value is higher than Hi value, then the Hi value will become the
same value as Lo data.

7-4 Basic Counting

7-4-1 Entering a Known Unit Weight
―·‖
1) Under the weighing mode, use the numeric keys together with key to input unit weight
UWS
.
value, and then press
2）Put the items on the weighing pan , the scale starts counting.
Note: Symbol ― ‖ points at ―UW‖ when entered unit weight is lower than 4/5 of scale division.
Unit weight Memory
1) UWS/ITEM
When there is one unit weight on the screen, and press key.


TARE/ key
/MR
2) Then enter a number for each unit weight. Use or to shift and
M-/HI PRINT/LO
or key to modify the value (or via numeric keys)
M+/SAVE ZERO/ESC
3) Press key to confirm and save. Press key to return to weighing
mode without saving.
Note: the maximum unit weight memory could up to 20pcs (00-19).
Unit weight Calling-out
UWS/ITEM
1) Press key. The window displays as shown on the right
M-/HI
(Press to clear the value in the unit price screen firstly)..


TARE/
/MR M-/HI
2) Input the number of unit weight. Press key or to shift and key or
PRINT/LO
to modify the value (or via numeric keys)
M+/SAVE
3) Press key to confirm called-out weight and return to the weighing mode. Press
ZERO/ESC
key to exit and return to weighing mode.
12