Description Of Parameter Values - Jadever JWL-1.5K Manual

5-2 Description of Parameter Values

1. P00:
Displays the offset value and the keypad testing can be conducted
2. P01: Backlight mode
Off ：No backlight
Auto：Auto on with items greater than 9d placed on the weighing pan or any key is
pressed. But auto off after N seconds (N=2s, 5s, 10s, 20s, ever) with no action
It is always on when the weights over 9e
Ever=
On： Backlight on
3. P02: Auto-off
Off：Non power off
5，10，30，60(minutes)
4. P03: Unit setting
Init : Press key
g, kg, final .(final=keep the final being used unit when power off )
Use: Press key
unit
5. P04: Zero range
d0, d1, d2, d3, d4 and d5. (d= scale division)
6. P05:
HoLd – 0： no hold function
HoLd – 1： Peak hold. Press any key to release
HoLd – 2： Hold after stable. Press any key to release
HoLd – 3： Hold after stable. Release after moving away the article
HoLd – 4： Press key
7. P06: Check weighing memory
on：Check weighing on off：Check weighing off
8. P07: Check weighing function
on: Check weighing under the condition that the weight is within the limits and the stable
indication appears
Offset value
Unit
to select the default unit when powering on the scale: pcs, 斤, lboz,
Unit
to select the weighing unit. on： Enable the unit off： Disable the
Hold function
HOLD/LO/-
(II)
to hold. Press any key to release
JWL 6