Checkweighing; Simple Counting - Jadever 1.5K User Manual

G/N
3) Press key to save and return
reverting to preset tare
2) Put the load on the container, the scale will automatically deduct the value of the container 2) Put the load on the container, the scale will automatically deduct the value of the container 2) Put the load on the container, the scale will automatically deduct the value of the container
from the total value.
G/N
NOTE: Press Key

Checkweighing

Use this mode to compare the weight of an item to Lower, and Upper limits. When the Use this mode to compare the weight of an item to Lower, and Upper limits. When the Use this mode to compare the weight of an item to Lower, and Upper limits. When the
checkweigh mode is enabled, the " " indicator will turn on. checkweigh mode is enabled, the " " indicator will turn on.
Lower limit setting
1) Began by pressing down key Began by pressing down key
inputting mode with the left-most
M+
2) Press key to increase setting values, key to increase setting values, key
UNIT/LO
to shift leftwards and key to shift leftwards and key
3) To save the Lower limit and return to weighing mode, Press key save the Lower limit and return to weighing mode, Press key
Upper limit setting
1) Began by Pressing down key
inputting mode with the left-most digit
M+
2) Press key to increase setting values, key to increase setting values, key
UNIT/LO
to shift leftwards and key to shift leftwards and key
3) e upper limit and return to weighing mode, Press key e upper limit and return to weighing mode, Press key
To save th
Place the sample on the weighing pan, if the sample weight is under the lower weight Place the sample on the weighing pan, if the sample weight is under the lower weight Place the sample on the weighing pan, if the sample weight is under the lower weight
range, the LOW lamp will light up. If the sample is wit range, the LOW lamp will light up. If the sample is within the lower and upper weight
range the OK lamp will light up. If the sample is over the upper weight range, the HI range the OK lamp will light up. If the sample is over the upper weight range, the HI range the OK lamp will light up. If the sample is over the upper weight range, the HI
lamp will light up.

Simple Counting

UNIT/LO
1) Press key
G/N
2) Press key , the ex-factory default sample size (10 pcs) is
M+
3) Press key to choose the sampling
return to weighing mode, the screen display
→
to display gross and net weight by turns. to display gross and net weight by turns.
UNIT/LO
most digit
PRINT/HI
PRINT/HI PRINT/HI
for 3 seconds. The scale is now in Digital for 3 seconds. The scale is now in Digital
most digit blinking.
PRINT/HI
to select the unit to select the unit "PCS".
factory default sample size (10 pcs) is displayed.
sampling amount .Available options are10 、 20 、
for 3 seconds. The scale is now in for 3 seconds. The scale is now in
M-
to decrease setting value, key to decrease setting value,
to shift
G/N
M-
to decrease setting value, to decrease setting value,
to shift
G/N
hin the lower and upper weight
Vetek Weighing AB Vetek
display " " before
Digital
.
key
.
、 50 、 100 、 200 、