Introduction; Precautions; Before Using The Product; Unpacking And Checking - Jadever JWL-1.5K Manual

1. Introduction

This manual contains installation and operation instructions for the JWL Series weighing
indicator. Please read the manual completely before installation and operation.

2. Precautions

◎ Place the scale on a flat and stable surface (Refer to Section 3-3).
◎ Verify that the input voltage and the plug type matches the local AC power supply (Refer to
Section 4-4).
◎ Make sure power cord does not pose a potential obstacle or tripping hazard.
◎ Keep the scale away from EMI noise, strong wind and vibration, which might cause
incorrect reading.
◎ Avoid sudden temperature changes (
◎ Do not drop loads on the platform.
◎ Disconnect the power supply while cleaning the scale.
◎ Do not immerse the scale in water or other liquids.
◎ Service should be performed by authorized personnel only.

3. Before Using the Product

3-1 Unpacking and Checking

Open the package and check the instrument for transport damage. Immediately inform your
dealer if you have complaints or if parts are missing. The package should contain:
● Scale body
●Weighing platform (plastic base with stainless steel pan)
● Power cord
● User manual

3-2 Installing Components

1) Before using the scale, remove the delivery protection screw (rotate counterclockwise),
which located underneath the scale, and cork the
Note: the JWL-30K model is shipped without the shipping protection screw.
2) Cover the weighing pans on the scale body properly.

3-3 Leveling the Scale

To compensate for small irregularities or inclinations at the location, the scale can be leveled.
The scale is equipped with a level indicator at the front panel .Adjust the leveling feet until the
air bubble in the indicator is centered as shown.
Note: The scale should be leveled each time its location is changed.
(II)
suitable operating temperature is between -5℃~ 40℃.)
plug buckle
JWL
.
1