Safety Information - Avery Dennison SONIC Knife Operator's And Service Manual

User's Manual—Sonic Knife
2.0

Safety Information

Classification: Avery Dennison - Public
Follow all of the safety requirements and procedures established for your

facility.
Turn off the power to the printer before cleaning, servicing, or replacing

any components.
You do not have to turn off the power when loading or changing supplies.

Follow all cautions and instructions marked on the product

There are hazardous moving parts in the printer. Service should be

performed only by trained service personnel.
All covers and guards must be in place when operating the printer and

should be removed only by trained service personnel.
Do not push objects of any kind through openings in the equipment.

Dangerous energy might be present and cause fire, electric shock, or
damage to the equipment.
Do not block or cover the openings of the equipment.

Do not place the equipment near a radiator or heat register. This could

cause the product to overheat.
Turn off the printer and disconnect the power cord before servicing the

printer.
 Operators should read and understand the Operators manual before
operating the printer
If the printer operates improperly or fails to respond to commands, turn

the printer off using the power switch. If the problem continues to occur,
obtain service for the printer.
The AC mains supply for the printer should be properly grounded and

provide overcurrent protection as required to meet all local electrical and
building codes.
The AC mains supply for the printer should be properly grounded and

should meet all local electrical and building codes and provide
overcurrent protection as required.
The AC mains supply for the printer should be properly grounded and

should meet all local electrical and building codes and provide
overcurrent protection as required
Do not remove, deface, or defeat any safety guards or warning labels.

Do not operate the printer with any parts missing or broken

The printer has been designed to be as safe as possible. However, there

are moving parts during the normal operation of the printer. Obey all
warning labels and safety instructions during operation.
Do not access the knife or Sonic Horn area when the printer is running.

9 9 9 9