20
4.1.3
4.1.4
4.2 Power Supply Settings
Classification: Avery Dennison - Public
Custom Trigger
The interface cable from the sonic knife is used to turn the sonics off
and on. The sonic unit is on all the time the stacker is running.
Air Cooling
The sonic horn does not require special cooling. However, to
maintain optimum efficiency, keep the horn stack area and the back
cover cooling vents free from debris and clutter.
The factory will pre-program the ultrasonic power supply to the correct settings.
Any changes to the factory setting may result in improper operation.
CAUTION: For proper operation, use the factory settings at all times.
Changing these settings may render the sonic knife inoperable. It may also
reduce cut performance, damage the knife, or hurt the reliability.
FIGURE 6
User's Manual—Sonic Knife