Table of Contents
Advertisement
24
5.0
Sonic Knife Cleaning
Classification: Avery Dennison - Public
To clean the knife and rollers:
1. Remove the cover.
2. Loosen the one side lock and two top lock screws as shown in Figure 8.
3. Flip back the feed conveyor.
4. Clean metal roller with a nylon brush and alcohol.
5. Rotate the feed knob to cover all roller surfaces. Do not allow alcohol to
touch the knife.
6. Allow to dry before reassembly.
NOTE: Disassembly and flipping back the feed conveyor can be used to
clear jams.
Top lock
screw
CAUTION: Each customer must take responsibility
to ensure the workstation created for the printer
meets the recommended requirements to ensure
optimal operation of the printer.
Side lock
screw
FIGURE 8
User's Manual—Sonic Knife
Advertisement
Table of Contents
