Sonic Knife Specification - Avery Dennison SONIC Knife Operator's And Service Manual

User's Manual—Sonic Knife
8.0

Sonic Knife Specification

Label Size Max: - 2.00" (51mm) web x up to 8" (203 mm) feed
Min: - 5/8" (16mm) web x 1.2" (30.5mm) feed – See minimum label length vs
machine speed in Appendix B.
Justification Material must be centered over ultrasonic horn.
Sense Mark The sense mark is not required – does not register to a sense mark – The printer
controls the cut position
Speed Controlled by speed of printer – See chart in Appendix B.
Stock Polyester woven edge fabric and AVERY DENNISON So-Soft® Products
Interface Cabling to printers and to Sonics
Dimensions 16.0" (406mm) high x 5 1/2" (138mm) wide x 14" (356mm) deep
Weight 25 Lbs. (12Kg).
Electrical 90-132 / 180-265 VAC 50-60Hz 10/5Amp - factory set
Temperature
41F (5C) to 104F (40C)
Humidity 5% to 90% non-condensing
Sound Level 78 dB(A)
Pressure
(SPL)
Options - Flag cutting – (Controlled by printer)
- Spare Parts Kit not required
- International Hardware Kit
The sonic knife is a modular design, which can be added to the Avery Dennison SNAP 500 printer
only.
Classification: Avery Dennison - Public
37 37 37 37