Tcs Port Setting - Furuno FMD-3200-BB Instruction Manual

5. RAYTHEON ANSCHUTZ AUTOPILOT NP-5400
5.2

TCS Port Setting

Output setting
Communication (input/output sentences) between the FMD and NP-5400 for the TCS
application are as shown in the table below.
FMDNP-5400
APB
HTD
PANZCRQ
PANZEST
PANZPSR
PANZHTD
—
—
—
Set the sentences to be output from the FMD to the NP-5400. Note that if [Source
SFID] ([TCS] tab [Other Setting]) is set for [TCS SFID], the following setting method
is available:
Data Source: ECD001/TCS(TCS0001), Formatter: ***
Note: As before, when using Data Source: ECD0xx/ECDIS (EI00xx), fill in all the sen-
tences to be output. (xx is 01 to 16).
Input setting
No setting required.
5-4
NP-5400FMD
ALF
ALC
AGHDT
AGHSC
AGTHS
HRSA
PANZRSA
PANZSRR
PANZSTA
TCS SFID setting
Output setting used by TCS SFID