Furuno FMD-3200-BB Instruction Manual page 70

1. INITIAL SETTING AND ADJUSTMENT
2. Select the appropriate equipment type on the menu bar. For example, select [EC-
DIS]  [FMD-3200|3300] to set the alert definitions for FMD-3200/FMD-3300.
Note: The equipment and sensors shown on the menu bar depend on the [Instal-
lation Parameters] menu settings.
3. Set the appropriate options referring to the table shown below.
1 Equipment type
2 [Source]
3 [Data Type]
4 [New Alert] button Add a new alert definition. See section 1.8.6.
5 [Delete Alert] but-
ton
6 Alert extension
button/
All selection
checkbox
7 Separate change
button
8 Switching check-
box (for alert in-
stance)
9 Checkbox to acti-
vate/deactivate
10 [Alert No.] (ALR)
[Alert ID] (ALF)
11 [Instance ID]
12 [Alert Name]
(ALR)
[Alert Description]
(ALF)
13 [Priority]
14 [Category]
15 [Input Unit]
1-64
Item
Selected equipment type.
Define the source category to which the alert is assigned for
display in the AMS mode's alert list window ([Navigation],
[Communication] or [External]).
Alert sentence format (ALF or ALR). For sensors, select the
alert notification sentence from the pull-down list.
Delete the alert definition. See section 1.8.8.
• [+]/[–]: Click to open/close all alerts ([+]: Open, [-]: Close).
This appears when the alert notification sentence is ALF.
• Check the checkbox to select all alert instances. This ap-
pears when the alert notification sentence is ALF.
• [+]/[–]: Click to open/close the detail window for the alert
([+]: Open, [-]: Close).
• Check the checkbox to select the alert, and all instances
are selected for ALF sentence. This only appears when
the alert notification sentence is ALF.
Show all instances or show only valid state instances. This
only appears when the alert notification sentence is ALF.
• [
• [
Check the checkbox to activate the alert.
Alert number
Instance number. This appears when the alert notification
sentence is ALF.
Alert name (editing possible)
The priority of the alert group (Alarm/Warning/Caution), pos-
sible to edit.
The category of the alert group (A to C), possible to edit.
The unit which input the alert.
Remarks
]: Show the data for all instances.
]: Show the data for activated instances.