Sensor Adapter Configuration - Furuno FMD-3200-BB Instruction Manual

1. INITIAL SETTING AND ADJUSTMENT
1.4.4

Sensor Adapter configuration

A maximum of eight Sensor Adapter MC-3000S can be connected to the sensor net-
work. In case of the redundant configuration, sixteen Sensor Adapters can be con-
nected to the network. The MC-3000S can connect a max. ten additional units (MC-
3010A/3020D/MC-3030D). Note that a maximum of five MC-3010A can be connected
to MC-3000S.
1. Click [Sensor Adapter] on the menu bar.
*: Select the talker ID for sentences output from the Sensor Adapter (II or SI).
Normally, keep the default setting ("II"). Select "SI", only when the talker ID must be
changed.
2. Check the check box of [MCV001] to activate.
3. Click [Details] to display the window as shown below. For the descriptions of the
each items, see step 3 of section 1.4.2.
4. Click [No.1 Sensor Adapter] on the menu bar.
The Sensor Adapter consists of four sub units: [Serial Input/Output], [Digital Input]*,
[Digital Output]*, and [Analog Input]*.
*: Not shown when you access the MC-3000S directly. Access the EC-3000 to ad-
just the setting for digital input, digital output and analog input.
1-26
* *