Furuno FMD-3200-BB Instruction Manual page 115

7. After the login, enter "dir".
The file names that are saved in the Sensor Adapter are displayed. Confirm that
the file names shown below are shown on the display.
Enter the password. Enter the password. Enter the password.
Enter "dir" . Enter "dir" . Enter "dir" .
8. Enter "bin", and then enter "hash".
9. Enter the command to transfer the firmware program.
Example: put 24500810_mc_cs_mainpg.bin
10. When you transfer other program, enter the command to transfer the program.
11. Enter "bye" to finish updating the firmware program.
Enter necessarily. Enter necessarily. Enter necessarily.
Enter necessarily. Enter necessarily. Enter necessarily.
The command to finish the ftp command. The command to finish the ftp command. The command to finish the ftp command.
12. Confirm the firmware program version (see section 2.3.2.).
2. SETTING FOR SENSOR ADAPTER
Enter the user name. Enter the user name. Enter the user name.
Check these file names. Check these file names. Check these file names.
The command to transfer the firmware program. The command to transfer the firmware program. The command to transfer the firmware program.
2-5