Advertisement
10- 00
PID target value selection
【0】: Potentiometer on Keypad
【1】: External AVI Analog Signal Input
【2】: External ACI Analog Signal Input
Range
【3】: Target Frequency set by Communication method
【4】: Set from keypad by parameter 10-02
【5】: Set from preset frequency
10-00 selections are only effective when frequency source selection is set to PID by parameters
00 - 05 \ 00 - 06= 6.
When 10-00=5, PID target value is set according to Parameter Group 05 "preset frequency".
I.e. : When 00-05=6, 10-00=5, 10-03=1, 03-00=2, 03-01=3, 03-02=4, turn on S1~S3
sequentially (0 : OFF, 1 : ON), please check the output frequency on display is consistent with
the 05-01 ~ 05-08.
Preset frequency 0 (05-01)
Preset frequency 1 (05-02)
Preset frequency 2 (05-03)
Preset frequency 3 (05-04)
Preset frequency 4 (05-05)
Preset frequency 5 (05-06)
Preset frequency 6 (05-07)
Preset frequency 7 (05-08)
10- 01
PID feedback value selection
【0】: Potentiometer on Keypad
【1】: External AVI Analog Signal Input
Range
【2】: External ACI Analog Signal Input
【3】: Communication setting Frequency
！Note: 10-00 and 10-01 can not be set to the same value.
10- 02
PID keypad input
【0.0~100.0】%
Range
10- 03
PID operation selection
【0】: PID Function disabled
【1】: FWD Characteristic. (Deviation is D-controlled)
【2】: FWD Characteristic. (Feedback is D-controlled)
【3】: REV Characteristic.
【4】: REV Characteristic.
Range
【5】：FWD Characteristic.
【6】：FWD Characteristic.
【7】：Reverse Characteristic. (Frequency Command + Deviation D Control)
【8】：Reverse Characteristic. (Frequency Command + Feedback D Control)
10- 03 =【1】.
Ddeviation (target - detected value) is derivative controlled in unit time set in parameter 10-07.
S1
S2
03-00=2
03-01=3
0
0
1
0
0
1
1
1
0
0
1
0
0
1
1
1
(Deviation is D-controlled)
(Feedback is D-controlled)
(Frequency Command +Deviation D Control)
(Frequency Command + Feedback D Control)
4-71
S3
03-02=4
0
0
0
0
1
1
1
1
Hide quick links:
Advertisement
