Setting The Times-Of-Use - Samson TROVIS 5432 Mounting And Operating Instructions

Automation system 5400 heating and district heating controller

Hide thumbs Also See for TROVIS 5432:

Table of Contents

Operation

1.6

Setting the times-of-use

Three time-of-use periods can be set for each day of the week.

If not all the time-of-use periods are required, the start and stop times of the third time-of-use

period (for just two periods) must be set to identical times or, alternatively, the start and stop

times of the second time-of-use (for just one period). The controller then automatically sets the

start and stop times to the stop time of the previous time-of-use period.

The times-of-use are displayed in the user level (–> Fig. 10 on page 49).

Note!

You can set the times-of-use for each day or for an entire week. If you want to set the

times-of-use for certain days to be different than the rest of the week, we recommend you set

the times-of-use for the entire week first (display:

ter the times-of-use for each day which require different times-of-use.

The week setting of the times-of-use writes over any already programmed times-of-use.

Parameter

Time period/day

Start time of first time-of-use

Stop time of first time-of-use

Start time of second time-of-use

Stop time of second time-of-use

Start time of third time-of-use

Stop time of third time-of-use

Note!

The controller includes an optimized activation function which makes sure the controller auto-

matically changes to the valid set point (

grammed time-of-use starts, to compensate for low outdoor temperatures.

EB 5432 EN

Range of values

1–7

= Monday,

07:00