Samson TROVIS 5432 Mounting And Operating Instructions page 17

Exit manual operation mode:
q
Select cLoSE on the display.
3s Close manual operation mode and return to operating level.
Displaying measured values during manual operation mode
q
Select StoP on the display.
3s Switch to user level.
Display: Time
q
Select the measured values t1 to t5 in sequence.
q
Select End on the display.
Switch to menu for moving actuator manually (oPEn, StoP or cLoSE).
Note!
The manual operation mode is maintained even after a power failure (display: StoP).
Manual operation mode
EB 5432 EN
17