Table of Contents
Advertisement
1
Operation
The controller is ready for use with the temperatures and operating time schedules preset by
the manufacturer.
On start-up, the current time and date need to be set at the controller (–> section 1.5).
1.1
Control knob
*
1.2
Operating modes
Automatic mode
Display:
and
The controller works in rated operation within the programmed times-of-uses and in reduced
operation outside of the times-of-use, provided that the control operation is not deactivated
due to the outdoor temperature. The controller switches automatically between both operat-
ing modes.
Day mode (constant rated operation)
Display: PArTY or
Regardless of the programmed times-of-use, the set points relevant for rated operation are
used constantly by the controller.
Stand-by mode (vacation mode)
Display: HoLidAY or – – –
In stand-by mode, the heating is switched off regardless of the programmed times-of-use.
The frost protection mode is still active.
Night mode (reduced operation; can only be set over the room panel)
Display:
Regardless of the programmed times-of-use, the set points relevant for reduced operation are
used constantly by the controller.
Turn q:
Select parameters, displays and temperature displays
Press
:
Confirm adjusted selection or settings
Press for three seconds
Switch from the operating level to the user level as well as from
the user level to the installation level
in the time-of-use periods,
3s:
and
outside of the times-of-use periods
Operation
5
EB 5432 EN
Advertisement
Table of Contents
