Setting The Times-Of-Use - Samson TROVIS 5579 Mounting And Operating Instructions

Automation system trovis 5500. heating and district heating controller

Table of Contents

1.6

Setting the times-of-use

Three times-of-use can be set for each day of the week.

If only one time-of-use is required, the start and stop times of the second time-of-use must be

set to identical times. In this case, the third time-of-use is not displayed.

If only two times-of-use are required, the start and stop times of the third time-of-use must be

set to identical times.

The times-of-use for the different control circuits are set at the rotary switches one after the

other:

Times-of-use

Heating circuit 1*

Heating circuit 2*

DHW heating/heating circuit 3*

Circulation pump

* Refer to page 161 for assignment

Parameters

Period/day

Start first time-of-use

Stop first time-of-use

Start second time-of-use

Stop second time-of-use

Start third time-of-use

Stop third time-of-use

* Default values (WE) valid for heating circuit 1/primary heat exchanger circuit (top rotary switch)

WE*

Range of values

1–7

1–7, 1, 2, 3, 4, 5, 6, 7 with 1–7 = every day,

1 = Monday, 2 = Tuesday, ..., 7 = Sunday

6:00