Table of Contents
Advertisement
®
OBID i-scan
ADR:
UID:
Read-only serial number of the transponder. The UID is required only in the addressed mode.
DATA:
0x00 = Cancel anti-theft or goods monitoring.
0x01 = Set up the goods watch mode.
ISO-ERROR:
ISO error code of transponder response. This byte is only available if STATUS = {0x95}.
Note:
Fast mode: Fast Write EAS = 0xD1; This command sets or clears the EAS bit and sends the re-
sponse with fast signal mode.
FEIG ELECTRONIC GmbH
System-Manual
ADR
b000
non-addressed
b001
addressed
b010
selected
Page 94 of 131
ID ISC.MR/PR/PRH101
H60301-3e-ID-B.doc
Hide quick links:
Advertisement
Table of Contents
Related Manuals for Feig Electronic OBID i-scan ID ISC.PR101
Related Products for Feig Electronic OBID i-scan ID ISC.PR101
- FEIG Electronic OBID i-scan ID ISC.PRH102-B
- FEIG Electronic OBID i-scan ID ISC.PRH100-A
- FEIG Electronic OBID i-scan ID ISC.PRH100-USB
- FEIG Electronic OBID i-scan ID ISC.PR100-USB
- FEIG Electronic OBID i-scan ID ISC.MR100-USB
- FEIG Electronic OBID ID ISC.ANT340/240-A
- FEIG Electronic OBID i-scan ID ISC.LRMU1000
- FEIG Electronic OBID i-scan ID ISC.LRU1000-M
- FEIG Electronic OBID i-scan ISC.LR200-A/B
- FEIG Electronic OBID ID RW02 Series
- FEIG Electronic ID ISC.PRH101-A
- FEIG Electronic ID ISC.PRH101-USB
- FEIG Electronic ID ISC.PRH101-B
- FEIG Electronic OBID i-scan ID ISC.PRH110-A
- FEIG Electronic OBID i-scan ID ISC.PR100-A
- Feig Electronic OBID i-scan ISC.PRHD102