0X22] Lock Multiple Blocks - Feig Electronic OBID i-scan ID ISC.PR101 Manual

®
OBID i-scan

6.1.3. [0x22] Lock Multiple Blocks

This command locks one or more data blocks.
The supported ISO15693Host commands depend on the different ISO15693 Transponder types, they
are described in chapter
REQUEST-DATA
4
0x22 MODE
RESPONSE-DATA (STATUS = 0x03)
5
DB-ADR-E
RESPONSE-DATA (STATUS = 0x95)
5
ISO15693 DB-ADR-E
ERROR
MODE:
Bit:
Function
ADR:
b000
b001
b010
UID:
Read only serial number of the Transponder. The UID is required only in the addressed mode.
DB-ADR:
First block number to be locked. First block can be any value between 0 and 255.
DB-N:
Number of data blocks to be locked, starting at DB-ADR.
The maximum number of DB-N, depends on DB-Size and the interface transmit buffer size
TX-BUF. The maximum number of DB-N is:
(TX-BUF - 10 )/(DB-
ISO15693 ERROR:
ISO15693 ERROR code of Transponder response. This byte is only available if STATUS = 0x95.
DB-ADR-E:
Block number where the error occurred.
FEIG ELECTRONIC GmbH
System-Manual
9.1. Supported ISO15693 Host commands for ISO15693
5 (6...13)
UID
6
7 6
0 0
non-addressed
addressed
selected
6 / (14) 7 / (15)
DB-ADR DB-N
5 4
0 0
Page 62 of 131
ID ISC.MR/PR/PRH101
Transponders.
3 2 1
0 ADR
H60301-3e-ID-B.doc
0