Protocols For Reader Control; 0X52] Baud Rate Detection; 0X55] Start Flash Loader - Feig Electronic OBID i-scan ID ISC.PR101 Manual

®
OBID i-scan

5. Protocols for Reader Control

5.1. [0x52] Baud Rate Detection

This protocol serves to determine the actual baud rate of the Reader's asynchronous interface.
Host → Reader
1
6 COM-ADR
Host ← Reader
1
6 COM-ADR
Note:
•
The return protocol will only be sent if the inquiry is executed with the baud rate and actual
parity of the Reader.

5.2. [0x55] Start Flash Loader

This protocol starts the internal Flash Loader in the Reader to perform a firmware update.
Please read the corresponding update description.
Host → Reader
1
5
Host ← Reader
1
6
Note:
•
This command is only available if the correct COM-ADR of the Reader is used.
•
All COM-addresses except 255 [0xFF] will be accept.
FEIG ELECTRONIC GmbH
System-Manual
2 3
[0x52]
2 3
[0x52]
2 3
0x00 [0x55]
2 3
0x00 [0x55]
Page 48 of 131
4 5,6
0x00 CRC16
4 5,6
0x00 CRC16
4,5
CRC16
4 5,6
0x00 CRC16
ID ISC.MR/PR/PRH101
H60301-3e-ID-B.doc