Feig Electronic OBID i-scan ID ISC.PR101 Manual page 30

®
OBID i-scan
CUSTOMER OPTION
Bit:
Function
Bit0 (INFINEON-OPTION):
b0:
b1:
ISO-Blocksize:
Defines the block size of an unknown ISO-transponder or if the transponder is used in the
non-addressed mode.
Range: 0x01 ... 0xFF
A value of 0x00 will be automatically set to a block size of 4byte.
FEIG ELECTRONIC GmbH
System-Manual
(from firmware version 1.04-A,
7 6 5
0 0 0
Use ISO Cmd's for Read/Write Infineon-Tag (4Byte Blocksize)
Use Infineon Custom Cmd's for Read/Write Infineon-Tag (8Byte Blocksize)
Page 30 of 131
1.03-USB):
4 3 2
0 0 0
ID ISC.MR/PR/PRH101
1 0
0 Bit0
H60301-3e-ID-B.doc