Table of Contents
Advertisement
2.3. Restoring the registry
Setup procedures for the registry restore varies depending on the backup method as explained below.
Using the backup and restore tool (BHTBackup.exe)
StartConfig menu
Using the "Registry backup at shutdown" function
StartConfig menu
Using the Registry Editor
Step 1 Export a registry file to be replaced after the initial setup.
Step 2 Add '_' (under line) in front of the registry file name.
(The registry file will run invisibly if the file name starts with '_' (under line).
The popup confirmation message will not be displayed when executing the registry file.)
Step 3 Deploy the registry file exported to the "¥Flash¥Setup" folder.
Step 4 Perform a full reset to delete the registry.
Step 5 The registry will be restored using the "Setup application auto execution at full reset" function.
Step 1 Back up data after the initial setup.
Step 2 Select the "File & Registry (BHT Backup)" in the Startup Config
menu. (Refer to "6.4.9 Startup Config" for details.)
Step 3 Perform a full reset (delete the registry).
Step 4 The registry will be restored using the "Backup file auto restore"
(BHTRestore.exe) at full reset.
Step 1 Perform the "Registry backup at shutdown" function after the
initial setup.
Step 2 Select the "Registry Only" (default) in the Startup Config menu.
(refer to "6.4.9 Startup Config" for details.)
Step 3 Perform a full reset to delete the registry.
Step 4 The registry will be restored using the "Backup file auto restore"
function at full reset.
- 8 -
Advertisement
Table of Contents
