Remote Display - Denso BHT-1361QWB-CE Software User Manual

4.2.6. Remote Display

.2.6. Remote Display
The BHT can be manipulated via a network. The BHT can be manipulated via a network.
The following application files "CERDISP.exe" and "CERHOST.exe" must be run respectively on the BHT The following application files "CERDISP.exe" and "CERHOST.exe" must be run respectively on the BHT
and the host computer in order to manipulate the BHT remotely. and the host computer in order to manipulate the BHT remotely.
BHT: Remote Display Application, CERDISP.exe BHT: Remote Display Application, CERDISP.exe
PC: Remote Display Utility, CERHOST.exe PC: Remote Display Utility, CERHOST.exe
Launching CERDISP.exe on a BHT Launching CERDISP.exe on a BHT
Follow the steps below to run the Remote Display Application (CERDISP.exe) on the BHT. Follow the steps below to run the Remote Display Application (CERDISP.exe) on the BHT.
Step 1 Step 1 Tap the "Desktop > Start > Run... , [Run]" in the Start menu Tap the "Desktop > Start > Run... , [Run]" in the Start menu
Step 2 Step 2 Enter "cerdisp" in the Run dialog (fig.1) then tap the OK button. Enter "cerdisp" in the Run dialog (fig.1) then tap the OK button.
Step 3 Step 3 Tap the "Start" button in the start confirmation dialog (fig.2). Tap the "Start" button in the start confirmation dialog (fig.2).
The desktop shown in fig.3 is displayed after the application is launched. The desktop shown in fig.3 is displayed after the application is launched.
To skip the start confirmation dialog (fig.2), enter "cerdisp -c" in the Run dialog (fig.1) instead of "cerdisp". To skip the start confirmation dialog (fig.2), enter "cerdisp -c" in the Run dialog (fig.1) instead of "cerdisp".
Run dialog (fig.1)
 Launching CERHOS.exe on a compu  Launching CERHOS.exe on a compu
Follow the steps below to run the Remote Display Utility on the computer. Follow the steps below to run the Remote Display Utility on the computer.
Step 1 Step 1 Copy the "cerhost.exe" which comes with the SDK (SDK¥Tools¥CERHOST folder) to the Copy the "cerhost.exe" which comes with the SDK (SDK¥Tools¥CERHOST folder) to the
computer. computer.
Step 2 Run the "cerhost.exe". The Cerhost screen (fig.4) is displayed.
Step 3 Select the "Connect..." from the "file" menu. The connect dialog (fig.5) is displayed.
Step 4 Select the BHT to connect from the active target device list shown on the connect dialog, then tap
The OK button.
Start confirmation dialog (fig.2)
r r
te te
- 27 -
after the cerdisp is launched (fig.3)