Settings - Denso BHT-1361QWB-CE Software User Manual

Barcode / 2d code handy terminal
Hide thumbs Also See for BHT-1361QWB-CE:
Table of Contents

Advertisement

6.12.7. Settings

The Settings menu is used to change
The settings are saved to the ini-file w
the password, font size and other options.
hen the OK button is pressed.
Password:
Administrator password (Default: no password)
Taskbar:
Taskbar Hide or Show in the us
Enable 10-key: When
numeric key corresponding to the number displayed
the list. Default is unchecked.
Keystroke time
interva
Time interval
application number. (Default: 2 seconds)
The specified time interval takes effect when the menu
has over 10 applications. If there are more than 10
applications in the list, the application numbers are
displayed as two digits numbers.
For example, when the both application num
"10" exist, the "01" application starts up if the "0" ke
not pressed within 2 second
Menu Font/Si
ze: The list is displayed with the selected font and size.
(Default: Tahoma, 12pt)
Size:
1 to 72pt
Default:
Restores the font and size to defa
in the section "6.12.8 Configuration file
Refer to "Value List"
(CeAdm .ini)" section for each value range of the settings.
in
- 139 -
checked, the applications start up by pressing the
l:
s between each keystroke determine the
s after the "1" key is pressed.
er mode (Default: Show)
in
ber "01" and
y is
ult.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bht-1361q-ceBht-1361bwb-ceBht-1361b-ce

Table of Contents