Settings Menu - Denso BHT-1361QWB-CE Software User Manual

6.8.3. Settings menu

Wirel ess LAN
Power: Select the wireless module power save mode from the pull-down
list.
CA M:
FastPSP: Power save mode (Default)
MaxPSP: Maximum power sa
 Note  Set an access point wit
the power save mode is set
BHT may not reconnect
number is set.
Radio mode: Select the radio mode from the pull-down list.
11b:
11b/g:
11b/g/n:
11a*:
11a/n*:
*These choices can be se
supported BHT models. Check the product label on the back of the
product to see if the 5GHz band WLAN is supported.
R efer to "6.1.4. Interface specifications" - "Wirel
U ser's Manual (Hardwar
Advanced Settings button is used to open the radio advanced settings
R efer to the next page for
Export WLAN Settings button is used to create a reg
contains only the WLAN settings (WLAN registry file
file can be copied to other BHT with the registry file (*.r
Refer to "6.4.10 Registry Editor
file with the Registry
Constantly awake mode
The wireless module is constantly powered ON.
The wireless mode swit
and CAM mode depend
ve mode
The wireless module wa
Network traffic volume .
802.11b (Default)
802.11b or 8 02.11g
802.11b, 802.11g or 8 02.11n (2.4 GHz band)
IEEE802.11a
IEEE802.11a or IEEE802.11n (5GHz band)
lected only for the 5GHz band WLAN
e) for details.
details.
(RegE it)" for how to import the registry
file (*reg).
- 88 -
ches between the power save mode
ing on network traffic volume.
kes up periodically regardless of
h low DTIM periods (2 or 3) when
to FastPSP or MaxPSP. The
to the access point if a larger
ess Interface" in the
istry file that
). The WLAN registry
eg).
d
.