Table of Contents
Advertisement
6.4.3. Power Management
.4.3. Power Management
There will be a time delay of a few s conds when automatically turning off the power after the specified time
There will be a time delay of a few s conds when automatically turning off the power after the specified time
has elapsed.
has elapsed.
W W
hen the "Enable automatic power off with wireless communication" is checked, the power turns OFF
hen the "Enable automatic power off with wireless communication" is checked, the power turns OFF
automatically even during wireless communication. Refer to the following information.
automatically even during wireless communication. Refer to the following information.
- When automatic power-off time is set to 0: The power does not automatically turn OFF.
- When automatic power-off time is set to 0: The power does not automatically turn OFF.
- When automatic power-off time is set to a non-zero value:
- When automatic power-off time is set to a non-zero value:
While the wireless device is open.
Checked
Unchecked
The power does NOT turn OFF
automatically
Point
Point
The power does not turn OFF for 10 seconds once the power turns ON.
The power does not turn OFF for 10 seconds once the power turns ON.
Switch to Standby Mode:
Timer (x 100 ms):
Sets the waiting time
to be switched to the standby mode in 100ms units.
(10: 100ms x 10 = 1 second)
System Properties
The Power Management menu is used to set the automatic power-off timer and st
The Power Management menu is used to set the automatic power-off timer and st
timer
timer
.
.
D D
ouble tap the Power Management icon in the System Properties to open the Power
ouble tap the Power Management icon in the System Properties to open the Power
Management menu. The default values are given in parentheses.
Management menu. The default values are given in parentheses.
Automatic Power off Time:
Battery Power(sec):(180)
External Power(sec): (0)
e e
Value
0
1 to 9
10 to 600
Selects the automatic power-off time from 0 to
600 seconds, while the BHT is not set in the CU
The power does not automatically turn OFF when
"0" is set.
Selects the
1800 seconds, while the BHT is set in the CU.
The power does not automatically turn OFF whe
"0" is set, or while communicating via a LAN (the
Power/Communication LED in the CU is flashing.)
While closing the wireless device.
The power automatically turns OFF
The power turns OFF automatically.
Description
Disable the standby mode
1 second
1 to 60 seco
nds
- 53 -
automatic power-off time from 0 to
During communication via a CU.
The power does NOT
Turn OFF automatically
andby
andby
.
n
.
Advertisement
Table of Contents
