Table of Contents
Advertisement
6.12.6. Adding applicati
ons (Ad
d to List)
To add applications to the user or admin list,
-
Press the
Add to List button in the trace mode, or
-
Press the Add to List button in the admin mode.
T
he screen on the left is displayed, and then follow the steps below.
S
tep 1 Select the User App List or Admin App list radio button
whichever applications are added to.
User App List: Application list for the user mode.
Admin App List: Application list for the admin mode.
T
he selected application list (user or admin) is shown on the screen
above.
The application list order can be changed by using the "Up/Down" button
n
ext to the list.
Step
2 Select an application to be ad
shown on the bottom screen, then tap the Up button nex
"Trace Results" text.
T
he selected application is added to the list.
Up button:
Down button: Removes the selecte
[...] button:
An application can also be
tr
ace results.
The message dialog shown on the left is displayed if the selected
application already exists in the list.
Tap No not to add the same application to the list.
Tap Yes to add the same application to the list.
If the same application is added, two of the same application will be
displayed in the list.
Step 3 Select the OK button to add the application to the application
list.
OK button: Saves the changes to the ini-file.
Cancel button: Discards any change in the menu. (No change)
Step 4 The application name, font and full path can be changed.
To change, tap the application in the list.
The pop-up window shown on the left is displayed.
Name: Enter the new application name
Path:
Enter the new application path
Font:
Check the box to change the font, and then select the font
from the pull-down list. The font can be changed for each
application in order to support multi-language and so on.
If the box is not checked, the font set in the Settings menu is
used to display application names.
- 138 -
ded from the trace results list
Adds the selected application to the list.
d application from the list.
Opens File select dialog.
selected from the dialog regardless of the
t to the
Advertisement
Table of Contents
