Table of Contents
Advertisement
6.9.2. Device pairing
The following
are three w
1. Pairing with a remote device from
Step 1 Select a remote device from
Step 2 Then hold down the device
Step 3 Select "Pair" in the context
Step 4 Enter the PIN code and tap the "OK" button to start pairing.
To cancel pairing, tap the "X" button.
2. Pairing with the BHT (local device) from a remote device without using the "Default Pin".
A remote device is prompted to enter
Enter the PIN code set for the remote
(refer to "6.9.3 Properties and configu
3. Pairing with the BHT (local devic
The PIN code prompt dialog will not be displayed.
T
he BHT is paired with a remote device automatically.
The following icons may appear during pairing.
Pairing
failed.
Note
The BHT (local device) may be displayed as an "Unknown" remote device
type in the remote device screen during pairing.
The Bluetooth communication will not be affected by the type "Unknown".
To display the BHT device type correctly, perform a device inquiry from the
remote device to search for the BHT before pairing.
ays of pairing the BHT with a remote device.
the BHT (local device).
the remote device list.
icon with the stylus to open the contextual menu.
ual menu to open the "Pair request W..." dialog.
the PIN code when trying to pair with the BHT (local device).
device.
ration" for the Default Pin)
e) from a remote device with the "Default Pin".
Pairing succeeded.
(Service is connected.)
Pairing succeeded.
(Service is not connected.)
- 105 -
Advertisement
Table of Contents
