Table of Contents
Advertisement
6.8.4. Profiles menu
- Notes -
- The "Highest
- If the "Priority order" is selected, the BHT attempts to
- Point -
The same SSID name can be used as a different
multiple profiles
Wireless LAN
The Profiles tab menu is us
The profile onnected is shown as an active profile on the Status section
in the inform
The BHT at
until connected if the wireless network is disconnected.
Connection Priority:
Sets the network con
Highest priority:
Connects to the network with the high
Priority order:
Connects to an ava
New button:
Creates a new pro
section.)
Edit button:
E
dits the selected profile.
D
elete button:
Deletes the selected profi
Scan button:
Scans for access points and shows the access poin
Certifica
tes
E
dits the cer
pr
iority" is rec
SSID and security type is u
in the priority order until a connection is established. As a result, a connection may
take time to establish. Th
profile unexpectedly in pla
SSIDs and se urity types e
c
with the same SSID name exist in a w
ed to set up the wireless network security.
c
ation tab page.
tempts to reconnect to the highest priority profile available
nection priority when multiple profiles are availabl
ilable network profile in the priority order.
file. (refer to the "Creating a new network profile"
le.
& PACs button:
tificates and PACs.
ommended if only one combination for the access po
sed.
e BHT may connect to an access point w
ces where the multiple access points with the available
xist.
profile with a different security, when
- 90 -
est priority profile.
t information.
connect to a profile one by on
ith a low priority
ireless network environment.
e.
int
e
Advertisement
Table of Contents
