Activesync/Windows Mobile Device Center; Installing Activesync Or Wmdc; Using Activesync Or Wmdc - Denso BHT-1361QWB-CE Software User Manual

3.9. ActiveSync/Windows Mobile Device Center

The ActiveSync/the Windows Mobile Device Center (WMDC) enables the following features by connecting the
BHT to a host computer via a USB.
- Synchronize data
- Backup data
- Copy or move data.
- Backup user programs
Download the software for the host computer operating system from the Microsoft web site.
- WMDC 6.1 for Windows 7/Vista/Server 2008
- ActiveSync 4.2 for Windows XP/Server 2003

3.9.1. Installing ActiveSync or WMDC

Install ActiveSync or WMDC to a host computer to connect the BHT to a host computer via a USB.
Make sure that the host computer has a USB port before installing.
- Point - ActiveSync or WMDC cannot connect the BHT to a host computer via a RS-232C
or wireless LAN.

3.9.2. Using ActiveSync or WMDC

Connect a host computer and a CU with a USB cable as shown below.
BHT
CU-1321
Refer to "6.3.1 ActiveSync(USB)" for how to use ActiveSync or WMDC in the BHT.
Refer to the next section for how to set up the host computer.
USB communication
- 19 -
Host computer