4.2.4. Remote Desktop Connection
.2.4. Remote Desktop Connection
4.2.5. Reset
The Reset(E) menu is used to reset or full reset the BHT.
Desktop
Remote Desktop Connection is used to control other computers
Remote Desktop Connection is used to control other computers
remotely.
Refer to the BHT RDP Plug-in Reference Manual to control local devices
such as barcodes, beeper, LED and so on for the BHT operating in the
Microsoft Windows terminal service/desktop environments.
Tap the Reset(E) in the Start menu.
To reset the BHT, uncheck the "Full reset"
button.
To full reset the BHT, check the "Full reset"
button.
- 26 -
then tap the Yes
then tap the Yes