Power Off - Denso BHT-1361QWB-CE Software User Manual

3.2. Power OFF

Use one of the following three methods to turn OFF the BHT.
Normal power OFF
Power OFF with
registry backup
Auto Power OFF
 Point 
Do not remove the battery while the Power OFF process message is displayed.
Failure to follow instruction may result in data stored in the BHT being lost.
The power turns OFF automatically when the BHT is not used for specified periods.
The factory default time is set for 3 minutes.
Refer to "3.7 Using the MENU key" or "6.4.3 Power Management" for details of auto
power OFF.
Press the power ( ) key.
The BHT turns OFF after the message on the left is displayed.
Hold down the SF key and press the power ( ) key for 3
seconds or more.
The message on the left is displayed and registry backup
begins.
The power turns OFF automatically when the backup is
completed.
The Registry is an area in which settings information required
for BHT operation is recorded. The OS restores the registry
automatically if it is lost.
The error message on the left is displayed if the OS fails to
restore the registry (the registry has not been backed up).
Refer to "6.4.2 File System" for details of how to restore the
registry default.
- 10 -