Ack/Nak Mode; Remote Mastermind™ For Usb; Verifone ® Ruby Terminal Default Settings - Honeywell Voyager XP 1470g Series User Manual

ACK/NAK Mode

ACK/NAK Mode On
Remote MasterMind™ for USB
When using a USB interface, you may wish to configure your scanner to communi-
cate with Remote MasterMind Scanner Management Software (ReM). Scan the
ReM On bar code to communicate with ReM. To disable this capability, scan ReM
Off. Default = ReM On.
Note: Remote MasterMind settings apply only to the Voyager XP 1470g. They are not
supported by the Voyager XP 1472g.
®
Verifone Ruby Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Verifone Ruby
terminal. This bar code sets the baud rate to 1200 bps and the data format to 8
data bits, mark parity bit, 1 stop bit. It also adds a line feed (LF) suffix and pro-
grams the following prefixes for each symbology:
16
ReM Off
Symbology Prefix
UPC-A A
UPC-E A
EAN-8 FF
EAN-13 F
Verifone Ruby Settings
* ACK/NAK Mode Off
* ReM On
Voyager 1470/1472 User Guide