Interleaved 2 Of 5 - Honeywell Voyager XP 1470g Series User Manual

the code page with which the bar codes were created (see
Character Replacements
from the

Interleaved 2 of 5

Interleaved 2 of 5 On/Off
Check Digit
No Check Digit indicates that the scanner reads and transmits bar code data with
or without a check digit.
When Check Digit is set to Validate, but Don't Transmit, the unit only reads Inter-
leaved 2 of 5 bar codes printed with a check digit, but will not transmit the check
digit with the scanned data.
When Check Digit is set to Validate and Transmit, the scanner only reads Inter-
leaved 2 of 5 bar codes printed with a check digit, and will transmit this digit at the
end of the scanned data. Default = No Check Digit.
Voyager 1470/1472 User Guide
Programming Chart. The data characters should then appear properly.
< Default All Interleaved 2 of 5 Settings >
* On
* No Check Digit
on page 220), and scan the value and the Save bar code
Code 39 Code Page
ISO 2022/ISO 646
Off
121