Related Manuals for Honeywell Granit XP 1991i
Summary of Contents for Honeywell Granit XP 1991i
- Page 1 Granit™ XP 1991i Cordless Industrial Area-Imaging Scanner Quick Start Guide 1991-EN-QS-01 Rev (a) 12/19...
-
Page 2: Getting Started
Agency Model: 1991iSR and 1991iMR+ Note: Refer to your User Guide for information about cleaning your device. Getting Started Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. When the base is connected and powered up, put the scanner in the base to establish a link. -
Page 3: Connecting The Base
Connecting the Base USB: Note: If you are charging the scanner using the USB cable, the current available for charging is reduced and charge times are increased. Charging via the power supply is faster. -
Page 4: Keyboard Wedge
Keyboard Wedge:... -
Page 5: Rs232 Serial Port
RS232 Serial Port:... -
Page 6: Reading Techniques
Reading Techniques The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read. Note: If the scanner beeps 3 times when scanning a bar code, the link has not been established. -
Page 7: Usb Serial
USB Serial If you are using a Microsoft® Windows® PC, you must download a driver from the Honeywell website. The driver will use the next available COM Port number. Scan the following code to program the scanner to emulate a regular RS232-based COM Port. -
Page 8: Keyboard Country
Keyboard Country Scan the appropriate country code below to program the key- board layout for your country or language. By default, national character replacements are used for the following characters: #$@[\]^‘{|}~ Refer to the ISO 646 Character Replacements chart in your User Guide to view the character replacements for each country. - Page 9 Great Britain Italy Norway Spain Switzerland Note: For a complete list of country codes, see the User Guide for your product. Locked Link If you link a scanner to a base using the Locked Link Mode, other scanners are blocked from being linked if they are inad- vertently placed into the base.
-
Page 10: Override Locked Scanner
To use a different scanner, you need to unlink the original scan- ner by scanning the Unlink Scanner bar code. Override Locked Scanner If you need to replace a broken or lost scanner that is linked to a base, scan the Override Locked Scanner bar code with a new scanner, and place that scanner in the base. - Page 11 Trigger The following bar codes will allow you to use the scanner in Manual Trigger - Normal Mode (need to press the trigger to read) or Presentation mode (the scanner is activated when it “sees” a bar code). Note: Presentation Mode continuously draws power, so use of the external power supply is recommended for this mode.
-
Page 12: Add Code Id Prefix To All Symbologies
Suffix If you want a carriage return after the bar code, scan the Add CR Suffix bar code. To add a tab after the bar code, scan the Add Tab Suffix bar code. Otherwise, scan the Remove Suffix bar code to remove the suffixes. Add CR Suffix Add Tab Suffix Remove Suffix... -
Page 13: Function Code Transmit
Function Code Transmit When this selection is enabled and function codes are con- tained within the scanned data, the scanner transmits the func- tion code to the terminal. Charts of these function codes are provided in your User Guide. When the scanner is in keyboard wedge mode, the scan code is converted to a key code before it is transmitted. - Page 14 If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. Honeywell International Inc.
- Page 15 European contact: www.honeywellaidc.com/ suivante : disponible en la siguiente disponibile al seguente indirizzo www.honeywellaidc.com/ en la siguiente dirección de conformidade da União Europeia Honeywell Productivity Solutions compliance. www.honeywellaidc.com/ dirección de internet: Internet: www.honeywellaidc.com/ compliance. internet: www.honeywellaidc.com/ está disponível em Personne-ressource en Europe : compliance.
- Page 16 Honeywell Productivity Solutions :ליצירת קשר באירופה 6545CG Nijmegen The Netherlands The Netherlands www.honeywellaidc.com Honeywell Productivity Solutions The Netherlands compliance Honeywell Productivity Solutions BV Lagelandseweg 70 :ﺎﺕ ﺍﻻﺗﺼﺎﻝ ﺍﻷﻭﺭﻭﺑ ﺔ Lagelandseweg 70 6545CG Nijmegen Lagelandseweg 70 Honeywell Productivity Solutions Hollanda 6545CG Nijmegen...
-
Page 17: Limited Warranty
Patents For patent information, see www.hsmpats.com. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.