Terminal Id Table; Data Format Editor Commands - Honeywell Voyager XP 1470g Series User Manual

Terminal ID Table

Terminal
USB
Serial
Keyboard

Data Format Editor Commands

When working with the Data Format Editor, a virtual cursor is moved along your
input data string. The following commands are used to both move this cursor to
different positions, and to select, replace, and insert data into the final output.
Send Commands
Send all characters
F1 Include in the output message all of the characters from the input message, starting
from current cursor position, followed by an insert character. Syntax = F1xx where xx
stands for the insert character's hex value for its ASCII code.
Refer to the
character codes.
Send a number of characters
F2 Include in the output message a number of characters followed by an insert
character. Start from the current cursor position and continue for "nn" characters or
through the last character in the input message, followed by character "xx." Syntax
= F2nnxx where nn stands for the numeric value (00-99) for the number of
characters, and xx stands for the insert character's hex value for its ASCII code.
Refer to the
decimal, hex and character codes.
102
Model(s)
PC keyboard (HID)
Mac Keyboard
PC Keyboard (Japanese)
Serial (COM driver required)
HID POS
USB SurePOS Handheld
USB SurePOS Tabletop
RS232 TTL
RS232 True
PS2 compatibles
ASCII Conversion Chart (Code Page 1252)
ASCII Conversion Chart (Code Page 1252),
Terminal
ID
124
125
134
130
131
128
129
000
000
003
for decimal, hex and
beginning on page 216 for
Voyager 1470/1472 User Guide