Page Mode - Honeywell Voyager XP 1470g Series User Manual

When External Power Only is selected, the scanner battery only charges from the
base's external power supply. If there is no external power supply, the scanner bat-
tery does not charge.
Note: If you are using a cordless charge base in
the only setting available.
Default = External or Interface Cable Power.
Page

Page Mode

By default, the paging button on the base or Access Point pages the scanners
associated with that base or Access Point. If you want the paging button on your
base or Access Point to be disabled, scan the Page Mode Off bar code, below.
When Page Mode is off, the base or Access Point will no longer page scanners when
the button is pressed. The red LED on the base or blue LED on the Access Point will
remain lit to indicate that Page Mode is off. (This light will go out when the button
is pressed, then back on when it's released.) Default = Page Mode On.
46
Base Charge Off
External Power Only
* Page Mode On
Presentation Mode, External Power Only is
Voyager 1470/1472 User Guide
External or Interface Cable
Power
Page Mode Off