Code 128 Code Page - Honeywell Voyager XP 1470g Series User Manual

Code 128 Message Length
Scan the bar codes below to change the message length. Refer to
Description
lengths = 0-80. Minimum Default = 0, Maximum Default = 80.
Minimum Message Length
Code 128 Append
This function allows the scanner to append the data from several Code 128 bar
codes together before transmitting them to the host computer. When the scanner
encounters a Code 128 bar code with the append trigger character(s), it buffers
Code 128 bar codes until it reads a Code 128 bar code that does not have the
append trigger. The data is then transmitted in the order in which the bar codes
were read (FIFO). Default = On.

Code 128 Code Page

Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
Character Replacements
from the
130
(page 114) for additional information. Minimum and Maximum
* On
on page 220), and scan the value and the Save bar code
Programming Chart. The data characters should then appear properly.
Code 128 Code Page
Voyager 1470/1472 User Guide
Message Length
Maximum Message Length
Off
ISO 2022/ISO 646