deleting the first space from each. The scanner transmits the appended data when
it reads a Code 93 bar code that starts with a character other than a space. Default
= Off.
Code 93 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
Character Replacements
from the
Straight 2 of 5 Industrial (three-bar start/stop)
Straight 2 of 5 Industrial On/Off
Voyager 1470/1472 User Guide
On
on page 220), and scan the value and the Save bar code
Programming
Chart. The data characters should then appear properly.
<Default All Straight 2 of 5 Industrial Settings>
On
Code 93 Code Page
* Off
ISO 2022/ISO 646
* Off
125