Ack/Nak Mode; Remote Mastermind™ For Usb; Verifone ® Ruby Terminal Default Settings - Honeywell Voyager XP 147 Series User Manual

ACK/NAK Mode

ACK/NAK Mode On
Remote MasterMind™ for USB
When using a USB interface, you may wish to configure your scanner to
communicate with Remote MasterMind Scanner Management Software (ReM).
Scan the ReM On barcode to communicate with ReM. To disable this capability,
scan ReM Off. Default = ReM On.
Note: Remote MasterMind settings apply only to the Voyager XP 1470g. They are not
supported by the Voyager XP 1472g.
®
Verifone Ruby Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Verifone Ruby
terminal. This barcode sets the baud rate to 1200 bps and the data format to 8 data
bits, mark parity bit, 1 stop bit. It also adds a line feed (LF) suffix and programs the
following prefixes for each symbology:
16
ReM Off
Symbology Prefix
UPC-A A
UPC-E A
EAN-8 FF
EAN-13 F
Verifone Ruby Settings
* ACK/NAK Mode Off
* ReM On
Voyager XP User Guide