Cts/Rts Emulation; Ack/Nak Mode; Secondary Interface For Usb - Honeywell Voyager 1602g User Manual

Apple® Macintosh computers recognize the scanner as a USB CDC class device
and automatically uses a class driver. This interface is only appropriate for an
Access Point.
Note: No extra configuration (e.g., baud rate) is necessary.

CTS/RTS Emulation

ACK/NAK Mode

Secondary Interface for USB

When using a USB interface, you may wish to configure your scanner to
communicate with scanner management software. Scan the Secondary Interface
On barcode to communicate with the scanner management software. To disable
this capability, scan Secondary Interface Off. This interface is only appropriate for
an Access Point. Default = Secondary Interface On.
Voyager 1602g User Guide
CTS/RTS Emulation On
ACK/NAK Mode On
Secondary Interface Off
USB Serial
* CTS/RTS Emulation Off
* ACK/NAK Mode Off
* Secondary Interface On
25